The Leaves are Falling (and a Little Snow Too)

There are plenty of opportunities for some nice riding in fall and winter whether for recreation/exercise or errands/work. Here are a few riding tips to keep in mind during these seasons:

  1. Check your lights front and rear. “Too many lights” are just about right in the low light, fall and winter conditions. Your lights are to make you visible (both day and night), but also to avoid those hidden ruts, potholes, and bumps in the street. Road debris at night is another hazard which good front lighting will help you avoid.IMGP5517
  2. Consider adding a helmet or head-mounted lamp to help see those potholes, debris, etc. at night. While a front light in blink mode makes people more aware of your presence, the headlamp helps you see obstacles. The advantage of a headlamp is that when you move your head, the light goes with you. When on trails with little or no street lighting, both the headlamp and front light (in steady mode) will light the path.
  3. Replace the batteries. Keep your re-chargeables charged.
  4. Have someone view your bicycle from behind in the dark with the lights “on.” Ensure that your gear or clothing does not block the light beams (front and rear) and that the rear light(s) aim toward following vehicles.
  5. Spoke lights or spoke reflectors are both fun and provide visibility from the side.
  6. Watch other people on bicycles and judge their visibility index as a guide to improving your own.
  7. Add an extra “blinky light” front and rear and use them both as nighttime supplements and as “daytime running lights.”
  8. Maybe shop for and use a helmet mounted rear-facing light.
  9. You will probably ride safer and smarter if you are comfortable – so plan your riding gear accordingly. Think layers.Rain2
  10. As you bundle up, look at your outer layer. If it is dark in color, either choose something that is not or pick up a cheepy reflective vest from your local big box home center.
  11. Wet leaves and snow are slippery so anticipate your stops and turns.
  12. Pay special attention to puddles of water or clumps of leaves as they can mask the plentiful potholes and craters in the paved surface.
  13. Recall that some pavement markings can also be slippery when wet or extra slippery when covered with wet leaves, snow, or ice.OLYMPUS DIGITAL CAMERA
  14. Keep your chain clean and lubricated (especially after riding in melted slush).
  15. You might want to inspect your tires for wear. You might swap the front to the rear (since the rear takes the most weight and wears quicker). If planning to ride in snow, you might invest in wider, knobby tires for better traction (if your bike accepts them). You may consider reducing tire pressures from max by 5 to 10 psi for better grip.
  16. Sunglasses are very important this time of year as well. With the days getting shorter, there is a greater chance you will finishing or starting a ride in low light conditions. Switch your tinted lenses to a rose or clear lens for better visibility in low light conditions.
  17. Plan your braking to avoid a spill.5189348630_6432fb1cce_z
  18. Sunglasses are also important this time of year. With the days getting shorter, there is a greater chance that you will finish or start a ride in low-light conditions. Switch your tinted lenses to a rose or clear lens for better visibility in low light conditions.
  19. Be mindful of slippery metal surfaces (such as utility covers and grates).
  20. Fall and winter is a good time to get ready for next year’s riding with a tune up from one of our local bicycle shops. This is a good time to support your local shop and to help them over the slower winter season. November through March is good time to get that special attention from your bicycle mechanic. Find out where at –
  21. Other winter riding tips –

To plan for low stress, safe cycling, plan you route with the free, interactive Albany Bicycle Coalition BikeAlbanyMap

To find more bicycle-related events, go to –


Leave a comment

Filed under Bike Tech, safety, Winter Cycling

Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s