Pre-Trip Bike Maintenance Check Up from Adventure Cycling

PreambleAdventure Cycling’s Alex Strickland provided the following pre-ride tips for the upcoming “Bike Travel Weekend.” Even if your fall riding plans are a bit less ambitious, you might want to review these reminders. Adventure Cycling leads in with this: “Will you do us a favor and take a few minutes to check your bike before you leave for your Bike Travel Weekend & Bike Your Park Day ride? Here’s a quick checklist to help you stay safe.”

Jacques Tati et sa bicyclette, 1947 or ’49

Touring Basics – Your campground is reserved, your gear is laid out in an Instagram-friendly grid, and tomorrow’s the big day. Before you go, take 30 minutes for a quick run-through of your bike — the old “ounce of prevention” — to make sure your wheels are road-worthy before you strike out on an adventure.

Frame – Start with the frame and give it a good wipe down with a rag. Once the dirt and grime are gone, make a quick check for cracks, especially around the welds.

Tires – With the tires inflated, look for sharp debris or glass embedded in the tire, as well as any cuts that look like they go through the rubber and tire casing. Also check tread wear; if the top tread is starting to become square in shape (as opposed to rounded), or the casing is visible through the tread, it’s time to swap out for a new tire. If you’re running tubeless, adding a little fresh sealant is a good idea.

Wheels – Spin the wheels while straddling the bike and give them a quick spot check to make sure that they are round and true, and that there isn’t any excessive friction in the hubs. Also, give the spokes a quick squeeze to check for consistent tension.

Brakes – Check the pads (some rim brake pads have wear indicators) to ensure there’s enough material left. A quick visual inspection of the braking surface (rim or disc rotor) should uncover any issues there. Finally, check the lever feel and adjust cables or bleed hydraulic brakes if required.

Chain and Cassette – Chain and cassette wear can wreak havoc on your shifting and increase the chance of a broken chain. Looking at the cassette, focus on the teeth. If the cassette teeth come to a sharp point, the cassette should be replaced. As for the chain, you can use a chain checker tool to make sure that it isn’t stretched. If you don’t have one of these tools, you can look at how the chain lies over the front chainrings. If the chain doesn’t seat itself on the chainring properly, it’s probably ready to be replaced. A quick clean and lube of the chain is always a good idea.

Shifting – Run through the gears to make sure that the shifting is dialed in. Check cables and housing to make sure there isn’t any excessive friction or fraying.

Rack – Check for cracks and ensure mounting bolts are tight.

Bolts – Go over the bike from front to back, making sure all of the bolts are snug.

Take a Spin – The last step is to take the bike out of the garage and give it a quick spin around the block. Run through the gears, test the brakes, and listen for any creaks that might require further investigation.

++++++

Leave a comment

Filed under Bike Tech, Feature, maintenance

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s